Car rear suspension VAZ-21214

Rear suspension elements
Rear suspension elements: 1 - rubber bushing; 2 - spacer sleeve; 3 - the lower insulating gasket of the spring; 4 - lower longitudinal rod; 5 - the lower support cup of the...

Rear suspension design features
The rear suspension is dependent, with helical coil springs and double-acting hydraulic telescopic shock absorbers. All suspension elements are attached to brackets on the rear...

Removing the shock absorber
Attention! We carry out work on a viewing ditch or a lift. ring wrench «at 19» we unscrew the nut of the shock absorber lower mounting bolt, holding the bolt from turning with a...

Removing the spring
Attention! We carry out work on a viewing ditch or a lift. When working on a viewing ditch, hang out the rear of the car. Detach the lower shock absorber (see Removing the shock...

Removing the upper longitudinal bar
Attention! We carry out work on a viewing ditch or a lift. ring wrench «at 19» we unscrew the nut of the bolt securing the rod to the rear axle beam, holding the bolt from turning...

Removing the lower longitudinal bar
Attention! We carry out work on a viewing ditch or a lift. Disconnect the lower shock absorber mount from the rear axle beam (see Removing the shock absorber ). ring wrench «at...

Removing the cross bar
Attention! We carry out work on a viewing ditch or a lift. ring wrench «at 19» unscrew the nut of the bolt securing the rod to the body bracket, holding the bolt from turning with...

Removing the rear axle beam
Attention! We carry out work on a viewing ditch or a lift. When working on a viewing ditch, hang out the rear of the car. Disconnect the propeller shaft from the main gear drive...