Attention! We carry out work on a viewing ditch or a lift.
Hang and remove the wheel.
To remove the right lateral thrust, turn the steering wheel all the way to the left.
We take out the cotter pin with pliers..
...and the key «at 22» unscrew the nut securing the side rod to the steering knuckle arm.
With a puller, press the ball pin out of the lever.
A fork puller can be used.
In the absence of a puller, we do not unscrew the nut completely, insert the mounting blade into the spacer between the side rod and the steering knuckle lever and strike the end of the lever with a hammer.
The ball pin can also be pressed out of the lever by inflicting a sharp blow from below with the back of the hammer on the steering knuckle lever near the hinge.
We take out the ball pin from the eye of the steering knuckle lever.
Using a puller, we press the ball pin of the thrust out of the pendulum lever.
The pin can also be pressed out by giving a sharp blow from below with a hammer through a chisel with a blunt end to the pendulum arm.
We take out the right side traction.
Similarly, remove the left side traction.
We install the side rod so that a long tip is attached to the steering knuckle lever.
Replacing the traction, check the convergence of the wheels (see Front wheel alignment).