Removing the relay box

To the right of the steering column, under the instrument panel, there is a block of three identical relays of the 113.3747-10 type, which control the inclusion of: low beam headlights, high beam headlights and tailgate glass heating.

Disconnect «negative» battery wire.

To remove the relay..



... disconnect the block.



Unscrewing the screw with a Phillips screwdriver,..



... remove the relay.

The starter and ignition relays are fixed under the additional fuse box (on a vehicle with an injection engine attached to the injection relay bracket).



Using a Phillips screwdriver, unscrew the self-tapping screw securing both relays.



After removing the relay, disconnect the pads.

Install the relay in reverse order.

Since all relays are of the same type, if one of them fails, you can temporarily connect its block to another relay. For example, if the starter enable relay fails, its block can be connected to the tailgate glass heating relay.