Headlights and lighting systems for cars VAZ-21214

Headlights — description and diagram
Scheme of switching on headlights and fog light: 1 - headlights; 2 - main fuse block; 3 – the relay of inclusion of a passing beam of headlights; 4 - ignition switch; 5 - outdoor...

Removing and disassembling the headlight, replacing the lamp
Disconnect «negative» battery wire. Removing the radiator cover (see Removal of facing of a radiator ). Using a Phillips screwdriver, loosen the three screws that secure the rim...

Headlight adjustment
Headlight adjustment scheme Choose a flat horizontal area within the base of the car at a distance of 5 m from the screen - a light wall of a building, garage, etc. You can use a...

Removing the headlight corrector
We disconnect the hydraulic corrector from the headlights and the instrument panel when removing these nodes. Entirely dismantled for replacement. To disconnect the working...

Exterior lighting, brake and reversing lamps, interior and trunk lighting
Scheme for switching on outdoor lighting: 1 - side light lamps in the front lights; 2 - fuse block; 3 - outdoor lighting switch; 4 - instrument lighting switch; 5 – a control lamp...

Removing the front lamp, replacing the lamps
To replace bulbs.. ... use a slotted screwdriver to unscrew the two screws securing the diffuser.. ... and remove the diffuser. Slightly press the lamp, turn it counterclockwise...

Removing the side turn signal, replacing the lamp
To replace the lamp.. ... we take out the cartridge with a rubber boot from the index case. We take out the lamp from the socket. To remove the housing and casing of the side turn...

Removing the rear light, replacing bulbs
Operations are shown on the example of the right lamp. We remove the hatch in the right upholstery. To replace bulbs.. ... we squeeze the two plastic clamps of the base with our...
There is 1 comment

Replacement of the switch of lanterns of a backing
Attention! We carry out work on a viewing ditch or a lift. Disconnect the wires from the switch. key «at 27» turn off the reverse light switch.. ... and remove it together with...

Removing license plate lights
Removing the rear door trim (see Removing the tailgate trim ). Using a Phillips screwdriver, unscrew the two screws.. ... and remove the ceiling. To replace the lamp.. ... pry...

Removing ceiling lamps and interior lighting switches
Disconnect «negative» battery wire. We pry off the cover of the right pillar with a screwdriver and take it out. We take out the lamp. To replace the headlight.. ... disconnect...

Description and diagram of direction indicators
Scheme of switching on direction indicators and alarms: 1 – lamps of indexes of turn in forward lanterns; 2 - side direction indicators; 3 - ignition switch; 4 - ignition relay; 5...

Removing the relay-interrupter of direction indicators and alarms
It is more convenient to remove the relay-breaker after dismantling the instrument cluster (see Removing the instrument cluster ). For clarity, the work was carried out with the...

Removing the Hazard Switch
Remove the lower part of the steering column cover (see Removing the steering column three-lever switch ). Disconnect the wiring harness from the alarm switch and remove it....