Attention! We change the oil on a fully warmed up engine. We carry out work on a lift or a viewing ditch.
On a VAZ-21214 car, we remove the mudguard of the power unit (see Removing the oil pan protection plate and injection engine splash guards).
hexagon «at 12» unscrew the cap of the oil pan..
... and drain the oil into a container with a volume of at least 4 liters.
The duration of draining the oil is at least 10 minutes. We turn the drain plug.
Remove the oil filter with a puller...
...and take it off.
Having lubricated the gasket of the new filter with engine oil, we screw the filter onto the fitting and tighten by hand 3/4 of a turn from the moment the gasket comes into contact with the cylinder block.
To fill the oil, remove the oil filler cap.
We pour oil.
To control the amount of oil poured..
... remove the oil level indicator from the guide tube (probe).
The oil level on the dipstick must be between the marks «min» and «max».
We start the engine. After the oil pressure indicator lamp goes out on the instrument panel, stop the engine. Check the oil level again. Top up if necessary.