Attention! We carry out work on a lift or a viewing ditch.
Check the fluid level in the clutch fluid reservoir and add fluid if necessary.
Remove the cap from the fitting of the working cylinder.
We put a transparent plastic hose on the fitting, the end of which is lowered into a container with brake fluid.
key «for 8» unscrew the fitting 1/2-3/4 turn.
At the same time, the assistant sharply presses the clutch pedal and gently releases it until the air bubbles emitted from the hose disappear.
With the clutch pedal depressed, wrap the fitting, remove the hose and put on the cap.