Door won't lock
The riveting of the axle of the external drive lever has loosened. When closing, the lever tooth does not engage with the ratchet due to the axial displacement of the lever - Remove the lock and securely riveting the axle.
Breakage of the spring of the lever of the external drive of the lock - Replace the lock.
The presence of dirt on the rubbing surfaces of the lock parts - Remove the lock and rinse in gasoline or kerosene. Lubricate the rubbing surfaces with fiol-1 or CIATIM-201 grease.
The door does not open with the inside handle
Incomplete stroke of the internal drive lever due to small stroke of the rod - Adjust the position of the internal handle of the lock drive.
The door opens with great effort and does not close well
The axis of the cracker of the door lock latch is bent - Straighten or replace the axis, adjust the position of the latch.
Wear of the working surface of the retainer cracker - Replace the cracker or retainer.
The door in the opening of the body is not adjusted - Adjust the position of the door.
Small flange clearances of the body with the door - Increase the clearances by bending the flanges.
Sliding glass does not lock in position
Breakage of the spring brake of the window regulator mechanism - Replace the window regulator.
The hood lock is not unlocked by the handle from the passenger compartment
Breakage of the drive cable, lock - Replace the cable.
The length of the cable for the lock drive is long - Adjust the length of the cable due to the loop fastening on the drive handle.
The hood does not lock
Broken lock spring - Replace spring.
Lock cable shortened — Adjust cable length.
Deformation of the upper cross member of the front end of the body - Align the cross member of the front end.
Offset lock body - Adjust the position of the lock.
Heated air constantly enters the cabin
Faulty heater tap drive - Check the condition of the drive, if the draft is broken, replace it.
The heater tap does not shut off the fluid flow - Replace the tap.
The air entering the cabin is not heated
The heater valve does not open due to a malfunction of the valve drive - Check the condition of the drive, if the draft is broken, replace it.
Faulty faucet - Replace the faucet.
Air is poorly supplied to the cabin
Faulty air intake cover actuator (lid closed) - Check the condition of the drive, fix the rod shell, if necessary, replace the rod.
Dark spots all over body
Application for hot water washing (over 80°С) - Repair minor damage by polishing, in case of major damage, repaint the body.
Use of leaded gasoline or other coating corrosive substances to remove the wax coating - Repair minor damage by polishing, if necessary, repaint the body.
Pink spots on light-colored surfaces
Ingress of coolant - Polish the damaged areas, repaint the body if necessary.
Light spots on dark-colored surfaces
Exposure to moisture during long-term storage of the car under an airtight cover - Polish the damaged areas, repaint the body if necessary.
Variety of painted surfaces
Painting with a batch of enamel that is different in tone from the main color - Pick up the color scheme, partially repaint the body.
Body corrosion
Poor-quality application of anti-noise mastic - Apply mastic.
Damage to the anti-noise mastic during the operation of the car - Apply mastic.
Localized corrosion of painted surfaces at welding points
Lack of epoxy primer on weld metal - Sand and repaint damaged areas.
Mechanical damage to the paintwork
Improper use of the car - Sand and repaint damaged parts, if necessary, straighten the parts.