Steering device and repair VAZ-1111 Oka

Features of the steering device
The steering is safety, with cardan joints and a steering mechanism of the type «gear - rack», with fastening of the steering gear rods to the ends of the rack. In crankcase 6...

Possible steering problems
Possible malfunctions of a steering, their reasons and methods of elimination. Increased steering wheel play Loosening of the nuts of fastening of the ball pins of the outer ends...

Checking the steering on a car
At each maintenance of the car, the condition of the protective covers is checked 4 ( see fig. 113 ), caps 12 ball rods and the density of their fit. They must be replaced in the...

Removal and installation of a steering
Install the car on a lift or inspection ditch and perform the following operations: raise the hood of the car and, turning the wheels of the car to the right (to the left), unpin...

Checking the gap between the rail stop and the nut
The steering gear housing is fixed rigidly and the rack is set to the middle position, which is determined by the size (115±0,25) mm (pic. 114) from the pinion axle to the end of...

Steering gear disassembly
Clamp the steering gear in a vice with soft jaws or install it in fixture 67.7820.9536 for disassembly and assembly work. Remove protective covers 1 (pic. 115) from the crankcase...

Checking the technical condition of the steering mechanism
Wash the cavities of the crankcase of the steering mechanism and all metal parts in kerosene or technical detergents. Rubber parts are washed with warm water and wiped with a...

Steering gear assembly
Before assembly, special attention is paid to ensure that chips or other foreign bodies do not get into the steering gear housing. Mandrel 67.7853.9594 (inner diameter 18 mm,...