Exterior body repair VAZ-11113 «Ока»

Removal and installation of a forward bumper
You will need: key "on 10", end head "on 10" screwdriver Disconnect the wire from the terminal "–" battery. The front buffer is fixed to the front panel of the body with two...

Removal and installation of a back bumper
You will need: key "on 10" screwdriver Disconnect the wire from the terminal "–" battery. The rear buffer is fixed to the rear panel of the body with four nuts (two are shown, the...

Front fender replacement
You will need: key "on 10" screwdriver Disconnect the wire from the terminal "–" battery. 1. Slide the side repeater housing forward and... 2. ... remove the repeater assembly...

Removal and installation of facing of a radiator
You will need a screwdriver. 1. Loosen the six screws securing the radiator grille (three are shown, the rest are arranged symmetrically). 2. Remove the radiator grille from the...

Hood replacement
You will need a key "on 10". 1. Outline the contours of the washers of the bolts securing the hood to the hinges (to ensure that the hood is installed in the same place if the...

Bonnet lock replacement
You will need: key "on 10" screwdriver 1. Loosen the six screws securing the radiator grille and remove it ( see subsection 9.4. ). 2. Outline the castle (to facilitate subsequent...

Replacement of draft of a drive of the lock of a cowl
You will need: key "on 10" screwdriver Remove the hood latch ( see subsection 9.5.2. ). 1. Unscrew the bolt securing the hood lock drive handle, remove the handle from the body...

Hood lock adjustment
You will need: key "on 10" screwdriver For ease of adjustment, remove the radiator cover. 1. Outline the castle (to determine its approximate position). 2. Loosen the two lock...

Replacement of an external rear-view mirror
You will need a screwdriver. The outside rear view mirror is attached to the left side door. 1. Pry with a screwdriver and remove the decorative cap from the exterior mirror...