- key "on 10"
- screwdriver
Disconnect the wire from the terminal "–" battery.
1. Slide the side repeater housing forward and...
2.... remove the repeater assembly from the opening of the front fender.
3. Remove the lamp socket from the repeater body. Push the cartridge with the protective cap and lamp into the wing opening.
4. Loosen the lower radiator grille bolt and fender bolt.
5. Remove the lower bolt securing the wing to the body sill.
6. Remove the front fender-to-pillar bolt by opening the front door.
7. Remove the three bolts securing the fender to the mudguard of the body and remove the fender from the vehicle. Install the wing in the reverse order of removal. At the same time, replace the wing gaskets.
8. To remove the front fender liner (if necessary) unscrew the five bolts of its fastening to the mudguard of the body (front wheel removed for clarity).