Electrical equipment of engine of cars VAZ-11113 «Ока»

Removal and installation of the generator
You will need keys "on 10", "at 17", "at 19". Disconnect the wire from the terminal "–" battery. Remove the alternator drive belt. For convenience, remove the radiator cover ( see...

Generator repair
You will need: keys "on 10", "at 17", "at 19" screwdrivers universal puller Remove the generator from the car ( see subsection 8.2.1. ). 1. Turn away a nut and remove an adjusting...

Replacing the brush holder with voltage regulator
You will need a screwdriver. Disconnect the wire from the terminal "–" battery. Work can be carried out without removing the generator from the vehicle. 1. Disconnect the wire end...

Checking the voltage regulator and rectifier unit
You will need a DC voltmeter. 1. Start the engine and let it run for at least 15 minutes. Remove the protective cover from the terminal "30" generator and by setting the engine...

Capacitor replacement
You will need: key "on 10" screwdriver Disconnect the wire from the terminal "–" battery. Capacitor failure (or disruption of his contact with "weight") determined by the increase...

Alternator Drive Belt Tension Adjustment
Installing the generator on the engine: 1 - generator; 2 – a nut of fastening of the generator to a tension level; 3 - generator drive belt; 4 - tension bar; 5 – a nut of...

Starter — removal and installation
You will need: keys "at 13" And "at 17" screwdriver Disconnect the wire from the terminal "–" battery. The starter is located under the cooling system thermostat, secured with a...

Starter repair
You will need: key "for 8" screwdriver electric soldering iron Starter: 1 - cover on the drive side; 2 - drive gear; 3 - armature shaft; 4 - body; 5 - cover from the side of the...