When turning the key from position "I" into position "II" to restart the engine, the starter circuit is interlocked. In this case, the engine can only be started by returning the key to the position "0", and then turning to position "II".
If electrical equipment does not work (with the serviceability of these devices and their circuits) or the steering wheel is not blocked by the anti-theft device, replace the contact group or ignition switch assembly.
To check the ignition switch, sequentially set the key to the positions at which the circuits indicated in Table 2 should be closed.
Table 2
Key position | Live contacts | Included circuits |
| "0"-switched off | 30 and 30/1 | — |
30–INT | Outdoor Lighting. Instrument lighting. High beam signaling | |
| "I"-ignition | 30/1–15/1 | The excitation winding of the generator. Ignition system. Windscreen cleaner. Carburetor solenoid valve. Direction indicators. Reverse light. control devices |
30/1–15/2 | Low and high beam headlights. Fog light. Rear window cleaner. Heated rear window. Glass washers. Heater fan. Engine cooling fan | |
| "II"-starter | 30–INT | See position "0" |
30/1–15/1 | See position "I" | |
30–50 | Starter | |
"III"-parking | 30–INT | See position "0" |