- pliers
- screwdriver
- two keys "at 13"
Remove the exhaust pipe (see subsection 10.11.2.) and main muffler (see subsection 10.11.3.).
The additional muffler is removed when it is mechanically damaged, cracks appear in the welds, through burnout, corrosion, as well as when replacing other elements of the exhaust system.
Pay attention to the muffler markings. The new muffler must have the same marking, as there are non-interchangeable exhaust system options. The arrow next to the marking indicates the direction of the exhaust flow.
1. While holding the clamp bolt with a wrench, unscrew the nut 3-5 turns with the second wrench. Then loosen the clamp (see subsection 10.11.2., operation 2).
2. Slide the clamp along the main muffler pipe from the installation site and carefully bend the tabs of the split end of the pipe with a screwdriver to loosen its fit in connection with the pipe.
3. Swinging the additional muffler and turning it along the axis, slide its branch pipe from the exhaust pipe and remove the muffler.
4. Install the additional muffler in the reverse order of removal. To increase the tightness of the connection, we recommend lubricating the inner surface of its branch pipe with a special sealant for exhaust systems. We recommend replacing the clamp with a new one at each disassembly.